Chili Drying Machine using Airtek Heat Pump Dryer

Chili Drying Machine with Airtek Industrial Heat Pump

This heat pump dryer is extremely efficient. If your chili drying capacity isn’t particularly large, Airtek Chili Drying Machine is a good option. It is simple to use, adaptable, efficient, and inexpensive.

Chilli peppers can be dried naturally in just air and sunlight, although the process takes many days to complete. Aside from the lengthy drying duration, drying thicker-skinned chili in the sun is difficult. Do you want to dry chili in hours or dry chili with thicker skin in days?

Chili drying machine with hot air circulation, often known as a heat pump chili drying machine. It works on the inverse Carnot principle, which takes energy from the surrounding air and circulates it four times before transferring it to the drying room to efficiently dry goods (maximum air temperature up to 80 °C).

How does your Chili Drying Machine Works?

• The heat pump dry evaporator collects air from the outside.
• The compressor produces high temperatures and high-pressure gas, which enters the condenser to release heat, which is then circulated through the chamber by the circulation fan.
  The temperature will reach a high of 20°C and a low of 20°C.
• In the dehumidification system, there is a heat recovery mechanism that recycles heat to heat new air, saving 60–70% of fresh air preheating energy consumption.
• In the drying room, hot air cycles in a flat flow, resulting in more uniform and thorough drying.
• The heat pump’s PLT intelligent control system can precisely control the drying room’s temperature, heating time,
  and discharging Wet strength.
• The heated air moving in the drying chamber will dry the material.
• The trolley adopt galvanized square material or stainless steel material, high temperature resistant, corrosion resistance and convenient to use.

Characteristics of our Chili Dryer Machine

• Use heat pump technology to capture heat from the air while also recovering waste heat.
• Low power consumption, the overall cost is lower than other fuels such as coal, oil, natural gas, etc.
• Simple operation, fully automatic operation, saving a lot of labor costs. PLC + Touch Screen control system can simply manage the drying temperature.
• There are partition sheets and fan motors inside the drying chamber that use the forced ventilation function to ensure a hot air cycle, allowing the raw materials to be dried evenly.
• The material does not craze, does not deform, is non-discoloring, never degenerates, does not oxidize, dries completely, rehydrates well, and retains nutritious content;
• 12 months warranty period, any accessories are provided free of charge during the warranty period